Providers of network appliances for small- and mid-size companies.

Product Updates


Airchitex Product Update Instructions

To update your product's firmware, follow these instructions:

  1. Right click on the update link in the Download column below and select "Save Target As..." or "Save Link As..." to save the update file somewhere on your local hard drive.
  2. Using your browser, go to your device's web page. As an example, type in http://10.0.0.148 (substitute the IP address that you've programmed your device with).
  3. From the menu in your browser page, select Administration > Reset/Reprogram.
  4. Use the Browse button to select the .update file that you saved.
  5. Click the BEGIN REPROGRAMMING button.
  6. The device will download the .update file and bring up a second page to begin the reprogramming process. Click Reset and Begin to start.
  7. Please be patient--the reprogramming process takes at least 20 seconds before the device will be ready. Note: The web page will not automatically reload.

Updates For Cuckoo

DateVersionDownloadDescription
2008-03-29 1.25 2008-03-29-124605.update
  • Added NTP Authentication. See the NTP authentication configuration page for more details.
  • Change HTML GPS Status page Signal Strength field to include technical description and units.
  • Set the default North American Daylight Savings Time setting for 2005 Energy Act rule (March/November) instead of previous (April/October).
  • Renamed "2007" DST act as "2005" where incorrectly labeled in Web interface. Act took effect in 2007, but is named for year the bill was passed.
    • 2008-02-19 1.24 N/A
  • Added email notification feature under Configuration | Email. See the email configuration page for more details.
  • Added DNS configuration for named email servers under Configuration | Network.
    • 2008-01-15 1.23 N/A
  • Fix to make logging more robust and recoverable for corrupt logs
  • Make Debug logging display warning instead of time to further discourage its use by customers.
    • 2007-03-12 1.22 N/A
  • Fix dates on internal web site not showing correct Daylight Savings Time
  • Update RTC clock when GPS synchronization is achieved
    • 2007-03-03 1.21 N/A
  • GPS location was being displayed as decimal degrees, but actually was Degrees and fractional minutes. Corrected to actually show decimal degrees.
    • 2007-02-20 1.20 N/A
  • Fix to bug where display stops updating but rest of unit continues to operate.
    • 2007-02-06 1.19 N/A
  • Fix Daylight Savings March transition for 2005 Energy Policy Act
  • Defensive changes in SNTP and truetime main threads for restarting after catching unhandled exceptions.
  • Additional logging if errors occur while getting time for user formatted strings (faceplate display or TIME protocol requests)
  • Log error when setting user display format to empty string
  • Downgrade "Primary reference not operating" log from Serious to Warning
  • Log any exceptions during UI processing (display updates, menu functions, and LED management)
    • 2007-01-25 1.18 N/A
  • Added time page loaded to main HTML page so administrator can determine approximate time of Cuckoo without needing to view LCD faceplate.
    • 2007-01-21 1.17 N/A
  • Fixed non-immediate effect when applying a new Daylight Savings Rule
  • Fixed crash caused by repeatedly refreshing event log screen with Debug level of events selected.
  • Removed extraneous logs
    • 2006-12-18 1.16 N/A
  • Report uptime in days if less than 30 days.
  • Fix incorrectly reported time under rare circumstances.
    • 2006-12-02 1.15 N/A
  • Added user-defined field to track Cuckoo device name, hostname, or location. Displayed on main HTML page.
  • Added Status-Ethernet page to show packets send and received, dropped, frame errors, and collision errors.
  • Display the device up-time on the main HTML page.
  • Show the approximate height of the antenna on the GPS status page.
  • Add user configurable setting to show times in event log and GPS last fix as either UTC or local time.
    • 2006-11-19 1.14 N/A
  • Fix incorrectly reported loss of pulse-per-second signal two weeks after reset
    • 2006-10-04 1.13 N/A
  • Improved performance of NTP packet reply for approximately 70us improvement (445us response time down to 375us)
  • Fix falsely reported failures of "Unable to get gateway" appearing in event log
  • Added "Refresh Log" buttons to event log page
  • Added cautionary message regarding use improper use of Debug logging level to Administration configuration page
  • Fix bug when using Debug log setting where NTP packet receive time was off by 4ms
    • 2006-09-26 1.12 N/A
  • Added international time zones
  • Added support for European and 2007 Daylight Saving Rules
  • Added ability to set customized Daylight Saving Rules
  • Added European automatic time-zone detection
  • Made Indiana automatic time-zone detection observe DST
  • Fixed bug that causes problems for dates in December
  • Fixed HTML network update so that it doesn't accidentally clear "Time using UTC" setting
  • Fixed POST command to return proper information to client browser
  • Added extra error checking and logging
    • 2006-06-24 1.11 N/A
  • Fixes for gateway not saved
  • Fixed incorrectly reporting operating primary reference

    • Please Note:

    Airchitex has been acquired by Intuitive Circuits as of August 16th, 2008. All Airchitex products will now be supported by Intuitive Circuts. For sales and support for any Airchitex products, please contact Intuitive Circuits at (248) 588-4400.




    Copyright © 2008 Airchitex, Inc. All Rights Reserved.

    No portion of this site may be reproduced in any manner without express permission of Airchitex, Inc.